Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have key fobs or LED indicators and is hidden within the vehicle's wiring.
The user may also turn off the system temporarily by using Transport Mode when renting their car. This guide will walk you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code you set. It is not detected by thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled with circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. Installers certified by Thatcham can assist you with the installation and programing of your Ghost system. They can also suggest a tracking system or alarm to complete your vehicle's protection package.
To avoid an accidental deployment of airbags or short circuits The installer must first remove your battery. After this is completed, the installer can safely begin work. Basic hand tools are helpful for securing connections with precision and a multimeter may be used to verify the electrical properties and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's guide will give specific instructions that are specifically tailored to your specific model.
It is essential to choose an area for grounding that is free of paint or debris during installation. Installers should also ensure that the immobiliser's wires, CAN H and can L are connected to the correct ECU ports. The wires can be plugged in or soldered, depending on the model. Using a top-quality connector is recommended to ensure a sturdy and secure connection.
Once the install is complete After the installation is complete, the customer can turn on after the installation is complete, the customer can activate Transport Mode. This allows mechanics or valet parking to use the vehicle without knowing the pin code. To do this, the customer must press the button for service on the dashboard 5 times within 2 seconds. After that the system will confirm with 5 indication signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent their vehicles frequently through platforms like Turo. Having an immobiliser can also lower insurance costs, as it reduces the likelihood of theft.
Getting Started
If you're looking for a solution to safeguard your vehicle from theft it is best to go with an autowatch ghost immobiliser. The device stops your car from running even when someone copies or steals your key. This is due to its sophisticated technology that is designed to prevent the engine from starting without the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence that only you can identify and makes it impossible for others to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will keep its value intact if you ever want to sell it.
Installing Ghost's immobiliser is straightforward, but you must follow the directions to avoid electrical issues and system malfunctions. First, you have to locate and identify a constant 12V power source as well as an appropriate grounding point on the vehicle's chassis. Then, you can begin connecting the wires for the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Also, be sure to insulate the connections with heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
After the wires have been connected, you can reconnect the battery and then turn on the engine to test the function of the immobiliser. Once you have verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Be sure to conceal it in a secure manner so that a thief cannot tamper with it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it complies with the highest standards of security and is a fantastic deterrent to car thieves. It is invulnerable to key cloning and hacking and cannot be disabled without the code. It is also simple to use and can be set into an auto valet mode so that your vehicle is not activated when you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using scanners for diagnostics. The system doesn't send or receive radio frequency signals but instead uses CAN data to communication with your ECU. Furthermore, go to the website doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. You are now able to start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking and will also protect the value of your pride and joy. If you ever have to hand over your vehicle to valet parking or for service The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Be sure that both are well-insulated and able to be touched. ghost 2 immobiliser problems are also recommended for bundling and securing the wires. This will reduce the risk of theft by potential thieves. To avoid mistakes, make sure to double-check these points and mark them using a label or tape. Check all connections for signs they are wearing out. Make sure all connections are firmly in place, and are properly sealed. Don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating correctly and that all connections are safe and well-insulated. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your car's ECU to prevent the engine from starting without authorization. Its innovative technology protects your vehicle from key cloning and hacking and other methods that thieves employ to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective security for your vehicle. The Ghost's unmatched features, coupled with its subtle design makes it a sought-after choice for car enthusiasts as well as security-conscious drivers.
It is important to follow the steps of installation to ensure a correct integration of the Ghost Immobiliser. Refer to the wiring diagram for the vehicle as it will help you locate and connect the wires. You'll then need to identify the power and grounding sources. Once you've found them, you'll be required to mark the points so that they are easily identifiable when installing. It is also vital to use only the best tools and materials. Basic hand tools can assist with making precise connections, while a multimeter will check electrical values and ensure safety. Cable ties and insulation tape will keep the connections neat and tidy. A Ghost-specific user manual is also available.
Before beginning the installation it is important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. This step should be performed frequently as part of your regular inspections of the vehicle to ensure that the system is always functioning properly.
Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will keep your pride and joy safe from would-be thieves and ensure that nobody is able to take off with your vehicle without the proper PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts to steal or tamper with. This lets you track your car in the event that it's stolen.
The Ghost is compatible with a wide variety of automobiles, including those from the majority of major manufacturers. If you are interested in securing your car using this advanced device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Registered installer This certification ensures that we follow strict standards and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that all installations are performed safely and in a correct manner.
