The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They prevent vehicles from starting without a key fob and are effective in stopping hotwiring as well as traditional methods of vehicle theft. However, more modern methods such as key replication and relay theft are becoming more common.
Created to counter these current trends The ghost immobiliser works to make your car completely unnoticeable. It is quiet and discreet and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects with the CAN data network of your vehicle in order to stop key cloning and theft. It is a TASSA-approved device, and insurance companies endorse it. It is almost unnoticeable by thieves and operates silently. It uses buttons on your steering wheel, the centre console, and door panels to create a unique pin code sequence that has to be entered before you are able to start your vehicle. You can create up to 20 different sequences to improve security. The system is easy to install and doesn't require additional hardware.
To ensure the best possible results It is recommended that you select a reputable CAN immobiliser installer who is skilled in your vehicle type. Ideally, they will have a workshop located in your local area, allowing you to visit and get the installation completed. You will also find an array of tools and materials that will help you with the installation. These include hand tools, a multimeter and insulation tape as well as heat shrink tubing to protect the connections. A user manual will give you the necessary instructions for your vehicle's wiring.
Before beginning the installation remove the battery from the circuit to avoid short circuits and airbag deployment. Double-checking the CAN L and H wires is crucial, as incorrect identification can result in a faulty integration of the system. It is recommended to mark the wires with small pieces of tape or mark them with labels. Also, utilize a multimeter for verification that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves can use different methods to get around the Ghost Immobiliser, including blocking and using spoofing signals. These methods work by amplifying signals sent from the key fob to the electronic controller unit. However, with the latest anti-jamming technology and vigilant monitoring, you can protect your vehicle from these sophisticated attacks.
Increased security
Ghost immobilisers provide an additional layer of protection to your car against theft. It is a PIN code protection system that is entered using existing buttons on your dashboard or steering wheel making it difficult for thieves to access the device and steal your vehicle. The device is designed to be hidden in your vehicle. It doesn't have any lights or other indicators to alert burglars to its presence. It connects directly to the ECU of your vehicle via the data bus. This means that it is not susceptible to relay attacks or hacking.
It's a great investment for those who have high-end vehicles, which are at higher chance of being stolen due to their price and popularity. Its advanced features shield your vehicle from key copying and ECU swapping. Some ghost immobilisers are also integrated with apps, meaning you can arm and disarm quickly. They may also include a service/valet setting that lets you temporarily disable the immobiliser while your vehicle undergoes repairs or maintenance.
Ghost immobilisers also have a great feature: it doesn't require any cutting of wire. This is a nice feature, especially if own a brand newer vehicle that doesn't have built-in immobiliser technology. Certain systems are capable of integrating with a GPS tracking device, providing an additional layer of security to your vehicle. The use of a GPS tracker can also help you reduce the cost of insurance. If you decide to purchase an immobiliser that is ghost, make sure it is TASSA-verified and that an experienced installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser has been designed to work with all major makes and models of vehicle protecting your pride and joy against theft. It generates a unique pin number using buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. It is tamper-proof and undetectable. It is also backed by three-year warranty. It is also fully approved by insurance companies. This means that you can lower your insurance cost of insurance.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It is connected directly to the engine controller through the CAN bus. It is nearly impossible to disable, remove or hack. Additionally, the Ghost system can be paired with an encrypted iPhone application that permits remote monitoring and management.
You can create an PIN that is easy to remember, but mathematically, it is impossible to guess for thieves. You can alter and customize the PIN at anytime to ensure your vehicle's security even when it's situated in a parking area or on the street. You can also choose a valet or service mode in case you require someone other than you to drive your car for a brief period such as when you're in the garage for servicing. link web page is an excellent way to protect your vehicle from being stolen by a scammer mechanic. You can choose an Ghost Call alert to give you extra security. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser protects your vehicle from theft methods such as key replication or relay attacks. It is activated by connecting to the car's CAN network and preventing communication with the engine ECU. This system makes it difficult for thieves to hack or clone your vehicle.
Installed, you'll need to enter a PIN up to 20 digits long using the buttons on the dashboard as well as the steering wheel to start the car. The system is completely hidden and unnoticeable to thieves as it does not emit any radio frequency signals. It can also be set to a user-changeable PIN code, which further enhances its security. The system is also designed to stop cutting of circuits which makes it nearly impossible to tamper with.
If you do have a problem remembering your PIN, there are some systems that let you communicate with the immobiliser using an app on your phone and instantly disarm it. Some systems even have a valet/service setting that allows you temporarily to start your car for instance, when you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit any radio signals, which is a significant advantage over other aftermarket car security systems. Additionally, it is simple to use and does not require any complex wiring. It can be used conjunction with dash cams for added security. Dash cams include the Thinkware F70, which features clear and sharp HD 1080p dashcam footage, Format Free Technology and parking mode. The system can also be hardwired for optimum performance and durability.
Installation
If you're looking to safeguard your vehicle from theft It is essential to choose the right immobiliser. This device will prevent car thefts by blocking communication between key fobs and the engine controller unit. This device stops thieves from intercepting and cloning the signal to start your vehicle. It also detects if it has been tampered and notify the owner of the vehicle.
The device is simple to install and connects to the existing systems in your vehicle. It does not require any modifications to the vehicle wiring and can be installed in a hidden place, like under the dashboard. Follow the directions in the manual to ensure the device is installed correctly. After installation, it's essential to test the system. This will confirm that the immobiliser ghost is working as intended.
You can purchase an Autowatch Ghost 2 immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to take over the system or bypass it. Installation typically takes between 2 and 3 hours.
It is recommended to consult the wiring diagram of your vehicle during the installation process. This will allow you to identify the CAN High and Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure they are secure and insulated.
After the installation is completed, you are able to start using the Ghost Immobiliser as normal. It will disable the ignition of your vehicle if it is not able to start it with the correct PIN, which you can enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode in case you need your vehicle to be serviced or valet-parked.